RegisteredGenerator

EnergyPriceIndex

1

EnergyPriceIndex

n/a

InstanceSet

1

InstanceSet

Dataset containing the data objects.

FuelCostCurve

0..1

FuelCostCurve

n/a

FuelRegion

0..1

FuelRegion

n/a

LocalReliabilityArea

0..1

LocalReliabilityArea

n/a

MktHeatRateCurve

0..1

MktHeatRateCurve

n/a

RMNRFlag

0..1

YesNo

Reliability must not run (RMNR) flag: indicated whether the RMR unit is set as an RMNR in the current market

RMRFlag

0..1

FlagTypeRMR

Reliability must run (RMR) flag: indicates whether the unit is RMR; Indicates whether the unit is RMR: N' - not an RMR unit '1' - RMR Condition 1 unit '2' - RMR Condition 2 unit

RMRHeatRateCurve

0..1

RMRHeatRateCurve

n/a

RMRManualIndicator

0..1

YesNo

Indicates the RMR Manual pre-determination status [Y/N]

RMRStartUpCostCurve

0..1

RMRStartUpCostCurve

n/a

RMRStartUpEnergyCurve

0..1

RMRStartUpEnergyCurve

n/a

RMRStartUpFuelCurve

0..1

RMRStartUpFuelCurve

n/a

RMRStartUpTimeCurve

0..1

RMRStartUpTimeCurve

n/a

RMTFlag

0..1

YesNo

Reliability must take (RMT) flag (Yes/No): indicates whether the unit is RMT

RegulatingLimit

0..1

RegulatingLimit

n/a

StartUpEnergyCurve

0..1

StartUpEnergyCurve

n/a

StartUpFuelCurve

0..1

StartUpFuelCurve

n/a

StartUpTimeCurve

0..1

StartUpTimeCurve

n/a

capacityFactor

0..1

PerCent

The ratio of actual energy produced by resource divided by the maximum potential energy if the resource is fully utilized. As an example, wind farms.

coldStartTime

0..1

float

Cold start time.

combinedCycleOperatingMode

0..1

string

Combined Cycle operating mode.

commericialOperationDate

0..1

date

n/a

constrainedOutputFlag

0..1

YesNo

Constrained Output Generator (COG) Indicator (Yes/No), per Generating Resource

energyDownRampRate

0..1

ActivePowerChangeRate

Response rate in MW per minute for ramping energy down.

energyUpRampRate

0..1

ActivePowerChangeRate

Response rate in MW per minute for ramping energy up.

extremeLongStart

0..1

YesNo

Some long-start up time units may need to receive start up instruction before DA market results are available. Long-Start resources may be either physical resources within the control with start-up times greater than 18 hours or the long-start contractual inter-tie commitment that shall be completed by 6 am one-day ahead. Therefore, there is a need for a process to determine the commitment of such resources before the DA market.

fuelSource

0..1

FuelSource

Values: Natural Gas Based Resource, Non Natural Gas Based Resource "NG" - Natural-Gas-Based Resource - a Resource that is powered by Natural Gas "NNG" - Non-Natural-Gas-Based Resource - a Resouce that is powered by some other fuel than Natural Gas

highControlLimit

0..1

ActivePower

High limit for secondary (AGC) control

hotIntTime

0..1

float

Hot-to-intermediate time (Seasonal)

hotStartTime

0..1

float

Hot start time.

intColdTime

0..1

float

Intermediate-to-cold time (Seasonal)

intStartTime

0..1

float

Intermediate start time.

loadFollowingDownMSS

0..1

YesNo

Certifies resources for use in MSS Load Following Down

loadFollowingUpMSS

0..1

YesNo

Certifies resources for use in MSS Load Following Up

lowControlLImit

0..1

ActivePower

Low limit for secondary (AGC) control

maxDependableCap

0..1

ActivePower

Maximum Dependable Capacity (MNDC). Maximun Net Dependable Capacity is used in association with an RMR contract.

maxMinLoadCost

0..1

CostRate

The registered maximum Minimum Load Cost of a Generating Resource registered with a Cost Basis of "Bid Cost".

maxPumpingLevel

0..1

ActivePower

max pumping level of a hydro pump unit

maxShutdownTime

0..1

date

Maximum time this device can be shut down.

maxStartUpsPerDay

0..1

integer

maximum start ups per day

maxWeeklyEnergy

0..1

float

Maximum weekly Energy (Seasonal)

maxWeeklyStarts

0..1

integer

Maximum weekly starts (seasonal parameter)

maximumAllowableSpinningReserve

0..1

ActivePower

Maximum allowable spinning reserve. Spinning reserve will never be considered greater than this value regardless of the current operating point.

maximumOperatingLimit

0..1

ActivePower

This is the maximum operating MW limit the dispatcher can enter for this unit

minLoadCost

0..1

CostRate

minimum load cost. Value is (currency/hr)

minimumLoadCostBasis

0..1

CostBasis

The cost basis for minimum load.

minimumLoadFuelCost

0..1

CostPerHeatUnit

The cost for the fuel required to get a Generating Resource to operate at the minimum load level

minimumOperatingLimit

0..1

ActivePower

This is the minimum operating MW limit the dispatcher can enter for this unit.

mustOfferRA

0..1

YesNo

Flag to indicate that this unit is a resource adequacy resource and must offer.

nameplateCapacity

0..1

ActivePower

MW value stated on the nameplate of the Generator -- the value it potentially could provide.

operatingMaintenanceCost

0..1

CostPerEnergyUnit

The portion of the Operating Cost of a Generating Resource that is not related to fuel cost.

pumpMinDownTime

0..1

float

The minimum down time for the pump in a pump storage unit.

pumpMinUpTime

0..1

float

The minimum up time aspect for the pump in a pump storage unit

pumpShutdownCost

0..1

float

The cost to shutdown a pump during the pump aspect of a pump storage unit.

pumpShutdownTime

0..1

integer

The shutdown time (minutes) of the pump aspect of a pump storage unit.

pumpingCost

0..1

CostRate

n/a

pumpingFactor

0..1

float

Pumping factor for pump storage units, conversion factor between generating and pumping.

quickStartFlag

0..1

YesNo

Quick start flag (Yes/No). Identifies the registered generator as a quick start unit. A quick start unit is a unit that has the ability to be available for load within a 30 minute period.

rampCurveType

0..1

RampCurveType

Ramp curve type. Identifies the type of curve which may be a fixed, static or dynamic.

regulationDownRampRate

0..1

ActivePowerChangeRate

Regulation down response rate in MW per minute

regulationFlag

0..1

UnitRegulationKind

Specifies if the unit is regulating or not regulating or expected to be regulating but is not.

regulationUpRampRate

0..1

ActivePowerChangeRate

Regulation up response rate in MW per minute.

resourceSubType

0..1

string

Unit sub type used by Settlements or scheduling application. Application use of the unit sub type may define the necessary types as applicable.

riverSystem

0..1

string

River System the Resource is tied to.

spinRampRate

0..1

ActivePowerChangeRate

Response rate in MW per minute for spinning reserve.

startUpCostBasis

0..1

CostBasis

The cost basis for start up.

syncCondCapable

0..1

YesNo

Is the Resource Synchronous Condenser capable Resource?

unitType

0..1

UnitType

Generating unit type: Combined Cycle, Gas Turbine, Hydro Turbine, Other, Photovoltaic, Hydro Pump-Turbine, Reciprocating Engine, Steam Turbine, Synchronous Condenser, Wind Turbine

useLimitFlag

0..1

YesNo

Use limit flag: indicates if the use-limited resource is fully scheduled (or has some slack for real-time dispatch) (Y/N)

variableEnergyResource

0..1

YesNo

Provides an indication that this resource is intending to participate in an intermittent resource program.

AuxillaryObject

0..*

AuxiliaryObject

n/a

GeneratingBids

0..*

GeneratingBid

n/a

StartUpCostCurves

0..*

StartUpCostCurve

n/a

Trade

0..*

Trade

n/a

UnitInitialConditions

0..*

UnitInitialConditions

n/a

ACAFlag

0..1

YesNo

Indication that this resource is associated with an Adjacent Control Area.

ASSPOptimizationFlag

0..1

YesNo

Indication that the resource participates in the optimization process by default.

AdjacentCASet

0..1

AdjacentCASet

n/a

AggregateNode

0..1

AggregateNode

An AggregateNode may be associated with up to many RegisteredResources.

AssetDatasheet

0..1

AssetInfo

Datasheet information for this power system resource.

DefaultBid

0..1

DefaultBid

n/a

ECAFlag

0..1

YesNo

Indication that this resource is associated with an Embedded Control area.

HostControlArea

0..1

HostControlArea

n/a

LMPMFlag

0..1

YesNo

LMPM flag: indicates whether the resource is subject to the LMPM test (Yes/No).

Location

0..1

Location

Location of this power system resource.

MarketParticipant

0..1

MarketParticipant

n/a

MktConnectivityNode

0..1

MktConnectivityNode

n/a

PSRType

0..1

PSRType

Custom classification for this power system resource.

Pnode

0..1

Pnode

A registered resource injects power at one or more connectivity nodes related to a pnode

PropertiesCIMDataObject

0..1

ChangeSetMember

The single CIM data object in the appropriate dataset context.

ResourceVerifiableCosts

0..1

ResourceVerifiableCosts

n/a

SMPMFlag

0..1

YesNo

SMPM flag: indicates whether the resource is subject to the SMPM test (Yes/No).

aliasName

0..1

string

The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy. The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.

commercialOpDate

0..1

date

Resource Commercial Operation Date.

contingencyAvailFlag

0..1

YesNo

Contingent operating reserve availiability (Yes/No). Resource is availiable to participate with capacity in contingency dispatch.

description

0..1

string

The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.

dispatchable

0..1

boolean

Dispatchable: indicates whether the resource is dispatchable. This implies that the resource intends to submit Energy bids/offers or Ancillary Services bids/offers, or self-provided schedules.

flexibleOfferFlag

0..1

YesNo

Flexible offer flag (Y/N).

hourlyPredispatch

0..1

YesNo

Indicates need to dispatch before the start of the operating hour. Only relevant in Real-Time Market. Applies to generation, intertie and participating load resource. Value (Y/N).

isAggregatedRes

0..1

YesNo

A flag to indicate if a resource is an aggregated resource.

lastModified

0..1

date

Indication of the last time this item was modified/versioned.

mRID

0..1

string

Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.

marketParticipationFlag

0..1

YesNo

Market Participation flag: indicates whether the resource participate in the market.

`maxBaseSelfSchedQty `

0..1

float

Maximum base self schedule quantity.

maxOnTime

0..1

float

Maximum on time after start up.

minDispatchTime

0..1

Hours

Minimum number of consecutive hours a resource shall be dispatched if bid is accepted.

minOffTime

0..1

float

Minimum off time after shut down.

minOnTime

0..1

float

Minimum on time after start up.

mustOfferFlag

0..1

YesNo

Must offer flag: indicates whether the unit is subject to the must offer provisions (Y/N).

name

0..1

string

The name is any free human readable and possibly non unique text naming the object.

nonMarket

0..1

YesNo

Flag to indicate that the Resource is not participating in the Market Operations.

pointOfDeliveryFlag

0..1

YesNo

Indication that the registered resource is a Point of Delivery (YES) resource which implies there is a POD Loss Factor.

priceSetFlagDA

0..1

YesNo

Price setting flag: indicates whether a resource is capable of setting the Market Clearing Price (Y) for the DA market, and if not, indicates whether the resource shall submit bids for energy at $ 0 (S) or not (N).

Initially in the RegisteredGenerator class. It was moved to the RegisteredResource class for the participating load dispatch purpose.

priceSetFlagRT

0..1

YesNo

Price setting flag: indicates whether a resource is capable of setting the Market Clearing Price (Y) for the RT market, and if not, indicates whether the resource shall submit bids for energy at $ 0 (S) or not (N).

Initially in the RegisteredGenerator class. It was moved to the RegisteredResource class for the participating load dispatch purpose.

registrationStatus

0..1

ResourceRegistrationStatus

Registration Status of resource - Active, Mothballed, Planned, or Decommissioned.

resourceAdequacyFlag

0..1

YesNo

Indication that this resource participates in the resource adequacy function.

AllocationResultValues

0..*

AllocationResultValues

n/a

Assets

0..*

Asset

All assets represented by this power system resource. For example, multiple conductor assets are electrically modelled as a single AC line segment.

Clearances

0..*

ClearanceDocument

All clearances applicable to this power system resource.

Commitments

0..*

Commitments

n/a

ConfigurationEvent

0..*

ConfigurationEvent

All configuration events created for this Power System resource.

ContractDistributionFactor

0..*

ContractDistributionFactor

n/a

ControlAreaDesignation

0..*

ControlAreaDesignation

n/a

Controls

0..*

Control

The controller outputs used to actually govern a regulating device, e.g. the magnetization of a synchronous machine or capacitor bank breaker actuator.

DiagramObjects

0..*

DiagramObject

The diagram objects that are associated with the domain object.

DispatchInstReply

0..*

DispatchInstReply

n/a

Domain

0..*

Domain

n/a

DopInstruction

0..*

DopInstruction

n/a

DotInstruction

0..*

DotInstruction

n/a

EnergyMarkets

0..*

EnergyMarket

n/a

ExPostResourceResults

0..*

ExPostResourceResults

n/a

ExpectedEnergyValues

0..*

ExpectedEnergyValues

n/a

ForbiddenRegion

0..*

ForbiddenRegion

n/a

FormerReference

0..*

FormerReference

n/a

GenericAction

0..*

GenericAction

The generic action that is performed on the power system resource

Instructions

0..*

Instructions

n/a

InterTie

0..*

SchedulingPoint

n/a

IntermittentResourceEligibility

0..*

IntermittentResourceEligibility

n/a

LoadFollowingInst

0..*

LoadFollowingInst

n/a

LoadFollowingOperatorInput

0..*

LoadFollowingOperatorInput

n/a

MPMResourceStatus

0..*

MPMResourceStatus

n/a

MPMTestThreshold

0..*

MPMTestThreshold

n/a

MarketObjectStatus

0..*

MarketObjectStatus

n/a

Measurements

0..*

Measurement

The measurements associated with this power system resource.

Names

0..*

Name

All names of this identified object.

OperatingShare

0..*

OperatingShare

The operating shares of this power system resource.

OperationalTags

0..*

OperationalTag

All operational tags placed on this power system resource.

OrgResOwnership

0..*

OrgResOwnership

n/a

PSREvents

0..*

PSREvent

All events associated with this power system resource.

RMROperatorInput

0..*

RMROperatorInput

n/a

RUCAwardInstruction

0..*

RUCAwardInstruction

n/a

RampRateCurve

0..*

RampRateCurve

n/a

Reason

0..*

Reason

n/a

ReportingGroup

0..*

ReportingGroup

Reporting groups to which this power system resource belongs.

ResourceAncillaryServiceQualification

0..*

ResourceCertification

RegisteredResources are qualified for resource ancillary service types (which include market product types as well as other types such as BlackStart) by the association to the class ResourceAncillaryServiceQualification.

ResourceAwardInstruction

0..*

ResourceAwardInstruction

n/a

ResourceCapacity

0..*

ResourceCapacity

n/a

ResourceCertification

0..*

ResourceCertification

n/a

ResourceDispatchResults

0..*

ResourceDispatchResults

n/a

ResourceGroups

0..*

ResourceGroup

n/a

ResourceLoadFollowingInst

0..*

ResourceLoadFollowingInst

n/a

SubControlArea

0..*

SubControlArea

n/a

SubstitutionResourceList

0..*

SubstitutionResourceList

n/a

TargetingCIMDataObject

0..*

ChangeSetMember

Data objects registered.

TimeSeries

0..*

TimeSeries

n/a

VerificationAction

0..*

VerificationAction

The verification action that is performed on the power system resource