ACLineSegment

InstanceSet

1

InstanceSet

Dataset containing the data objects.

LineGroundingAction

0..1

GroundAction

Ground action involving clamp usage (for the case when the ground is applied along the line segment instead of at its terminals).

LineJumpingAction

0..1

JumperAction

Jumper action involving clamp usage (for the case when the jumper is applied along the line segment instead of at its terminals).

PerLengthImpedance

0..1

PerLengthImpedance

Per-length impedance of this line segment.

WireSpacingInfo

0..1

WireSpacingInfo

The wire spacing information that applies to this AC line segment

b0ch

0..1

Susceptance

Zero sequence shunt (charging) susceptance, uniformly distributed, of the entire line section.

bch

0..1

Susceptance

Positive sequence shunt (charging) susceptance, uniformly distributed, of the entire line section. This value represents the full charging over the full length of the line.

g0ch

0..1

Conductance

Zero sequence shunt (charging) conductance, uniformly distributed, of the entire line section.

gch

0..1

Conductance

Positive sequence shunt (charging) conductance, uniformly distributed, of the entire line section.

r

0..1

Resistance

Positive sequence series resistance of the entire line section.

r0

0..1

Resistance

Zero sequence series resistance of the entire line section.

shortCircuitEndTemperature

0..1

Temperature

Maximum permitted temperature at the end of SC for the calculation of minimum short-circuit currents. Used for short circuit data exchange according to IEC 60909.

x

0..1

Reactance

Positive sequence series reactance of the entire line section.

x0

0..1

Reactance

Zero sequence series reactance of the entire line section.

ACLineSegmentPhases

0..*

ACLineSegmentPhase

The line segment phases which belong to the line segment.

Clamp

0..*

Clamp

The clamps connected to the line segment.

Cut

0..*

Cut

Cuts applied to the line segment.

LineFaults

0..*

LineFault

The line faults of the line segment.

AssetDatasheet

0..1

AssetInfo

Datasheet information for this power system resource.

BaseVoltage

0..1

BaseVoltage

Base voltage of this conducting equipment. Use only when there is no voltage level container used and only one base voltage applies. For example, not used for transformers.

EquipmentContainer

0..1

EquipmentContainer

Container of this equipment.

GroundingAction

0..1

GroundAction

Action involving grounding operation on this conducting equipment.

JumpingAction

0..1

JumperAction

Jumper action involving jumping operation on this conducting equipment.

Location

0..1

Location

Location of this power system resource.

Outage

0..1

Outage

The outage that is isolated by the outage isolation equipment.

PSRType

0..1

PSRType

Custom classification for this power system resource.

PropertiesCIMDataObject

0..1

ChangeSetMember

The single CIM data object in the appropriate dataset context.

aggregate

0..1

boolean

The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine. The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.

aliasName

0..1

string

The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy. The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.

description

0..1

string

The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.

inService

0..1

boolean

Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.

length

0..1

Length

Segment length for calculating line section capabilities.

mRID

0..1

string

Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.

name

0..1

string

The name is any free human readable and possibly non unique text naming the object.

networkAnalysisEnabled

0..1

boolean

The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.

normallyInService

0..1

boolean

Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.

AdditionalEquipmentContainer

0..*

EquipmentContainer

Additional equipment container beyond the primary equipment container. The equipment is contained in another equipment container, but also grouped with this equipment container.

Assets

0..*

Asset

All assets represented by this power system resource. For example, multiple conductor assets are electrically modelled as a single AC line segment.

Clearances

0..*

ClearanceDocument

All clearances applicable to this power system resource.

ConfigurationEvent

0..*

ConfigurationEvent

All configuration events created for this Power System resource.

ContingencyEquipment

0..*

ContingencyEquipment

The contingency equipments in which this equipment participates.

Controls

0..*

Control

The controller outputs used to actually govern a regulating device, e.g. the magnetization of a synchronous machine or capacitor bank breaker actuator.

DiagramObjects

0..*

DiagramObject

The diagram objects that are associated with the domain object.

EqiupmentLimitSeriesComponent

0..*

EquipmentLimitSeriesComponent

Equipment limit series calculation component to which this equipment contributes.

EquipmentUnavailabilitySchedule

0..*

EquipmentUnavailabilitySchedule

n/a

Faults

0..*

Fault

All faults on this equipment.

GenericAction

0..*

GenericAction

The generic action that is performed on the power system resource

LimitDependencyModel

0..*

LimitDependency

Limit dependencymodels organized under this equipment as a means for organizing the model in a tree view.

Measurements

0..*

Measurement

The measurements associated with this power system resource.

Names

0..*

Name

All names of this identified object.

OperatingShare

0..*

OperatingShare

The operating shares of this power system resource.

OperationalLimitSet

0..*

OperationalLimitSet

The operational limit sets associated with this equipment.

OperationalRestrictions

0..*

OperationalRestriction

All operational restrictions for this equipment.

OperationalTags

0..*

OperationalTag

All operational tags placed on this power system resource.

Outages

0..*

Outage

All outages in which this equipment is involved.

PSREvents

0..*

PSREvent

All events associated with this power system resource.

PinEquipment

0..*

PinEquipment

n/a

ProtectionEquipments

0..*

ProtectionEquipment

Protection equipment used to protect specific conducting equipment.

ProtectiveActionAdjustment

0..*

ProtectiveActionAdjustment

The operating condition to the Conducting Equipment is changed when protective action adjustment is activated. For ShuntCompensator or other conducting equipment that operates on discrete values (integer), the values given in float will be rounded.

ProtectiveActionEquipment

0..*

ProtectiveActionEquipment

Protective action is controlling equipment. This can be direct signals from the control center, or emulation of action done by protection equipment.

ReportingGroup

0..*

ReportingGroup

Reporting groups to which this power system resource belongs.

SvStatus

0..*

SvStatus

The status state variable associated with this conducting equipment.

TargetingCIMDataObject

0..*

ChangeSetMember

Data objects registered.

Terminals

0..*

Terminal

Conducting equipment have terminals that may be connected to other conducting equipment terminals via connectivity nodes or topological nodes.

UsagePoints

0..*

UsagePoint

All usage points connected to the electrical grid through this equipment.

VerificationAction

0..*

VerificationAction

The verification action that is performed on the power system resource

WeatherStation

0..*

WeatherStation

n/a