GovHydroPID2
Hydro turbine and governor. Represents plants with straightforward penstock configurations and "three term" electro-hydraulic governors (i.e. WoodwardTM electronic). [Footnote: Woodward electronic governors are an example of suitable products available commercially. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of these products.]
Type |
Class |
|---|---|
URI |
|
CIM standard (perspective) |
IEC61970 (Grid) |
Slots
| Name | Cardinality | Type | Description |
|---|---|---|---|
1 |
Dataset containing the data objects. |
||
0..1 |
Factor multiplying Tw (Atw). Typical value = 0. |
||
0..1 |
Turbine damping factor (D). Unit = delta P / delta speed. Typical value = 0. |
||
0..1 |
Feedback signal type flag (Flag). true = use gate position feedback signal false = use Pe. |
||
0..1 |
Gate opening at speed no load (G0). Typical value = 0. |
||
0..1 |
Intermediate gate opening (G1). Typical value = 0. |
||
0..1 |
Intermediate gate opening (G2). Typical value = 0. |
||
0..1 |
Maximum gate opening (Gmax) (> GovHydroPID2.gmin). Typical value = 0. |
||
0..1 |
Minimum gate opening (Gmin) (> GovHydroPID2.gmax). Typical value = 0. |
||
0..1 |
Derivative gain (Kd). Typical value = 0. |
||
0..1 |
Reset gain (Ki). Unit = PU/s. Typical value = 0. |
||
0..1 |
Proportional gain (Kp). Typical value = 0. |
||
0..1 |
Base for power values (MWbase) (>0). Unit = MW. |
||
0..1 |
Power at gate opening G1 (P1). Typical value = 0. |
||
0..1 |
Power at gate opening G2 (P2). Typical value = 0. |
||
0..1 |
Power at full opened gate (P3). Typical value = 0. |
||
0..1 |
Permanent drop (Rperm). Typical value = 0. |
||
0..1 |
Controller time constant (Ta) (>= 0). Typical value = 0. |
||
0..1 |
Gate servo time constant (Tb) (> 0). |
||
0..1 |
Speed detector time constant (Treg) (>= 0). Typical value = 0. |
||
0..1 |
Water inertia time constant (Tw) (>= 0). Typical value = 0. |
||
0..1 |
Maximum gate opening velocity (Velmax) (< GovHydroPID2.velmin). Unit = PU / s. Typical value = 0. |
||
0..1 |
Maximum gate closing velocity (Velmin) (> GovHydroPID2.velmax). Unit = PU / s. Typical value = 0. |
||
0..1 |
Asynchronous machine model with which this turbine-governor model is associated. TurbineGovernorDynamics shall have either an association to SynchronousMachineDynamics or to AsynchronousMachineDynamics. |
||
0..1 |
The single CIM data object in the appropriate dataset context. |
||
0..1 |
Synchronous machine model with which this turbine-governor model is associated. TurbineGovernorDynamics shall have either an association to SynchronousMachineDynamics or to AsynchronousMachineDynamics. |
||
0..1 |
Turbine load controller providing input to this turbine-governor. |
||
0..1 |
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy. The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time. |
||
0..1 |
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy. |
||
0..1 |
Function block used indicator. true = use of function block is enabled false = use of function block is disabled. |
||
0..1 |
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements. |
||
0..1 |
The name is any free human readable and possibly non unique text naming the object. |
||
0..* |
The diagram objects that are associated with the domain object. |
||
0..* |
All names of this identified object. |
||
0..* |
Data objects registered. |
aliasName
The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy. The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
|
Inherited from |
AsynchronousMachineDynamics
Asynchronous machine model with which this turbine-governor model is associated. TurbineGovernorDynamics shall have either an association to SynchronousMachineDynamics or to AsynchronousMachineDynamics.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
|
Inherited from |
d
Turbine damping factor (D). Unit = delta P / delta speed. Typical value = 0.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
description
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
|
Inherited from |
DiagramObjects
The diagram objects that are associated with the domain object.
URI |
|
|---|---|
Cardinality |
0..* |
Type |
|
Inherited from |
enabled
Function block used indicator. true = use of function block is enabled false = use of function block is disabled.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
|
Inherited from |
feedbackSignal
Feedback signal type flag (Flag). true = use gate position feedback signal false = use Pe.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
g0
Gate opening at speed no load (G0). Typical value = 0.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
gmax
Maximum gate opening (Gmax) (> GovHydroPID2.gmin). Typical value = 0.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
gmin
Minimum gate opening (Gmin) (> GovHydroPID2.gmax). Typical value = 0.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
InstanceSet
Dataset containing the data objects.
URI |
|
|---|---|
Cardinality |
1 |
Type |
|
Inherited from |
mRID
Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
|
Inherited from |
mwbase
Base for power values (MWbase) (>0). Unit = MW.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
name
The name is any free human readable and possibly non unique text naming the object.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
|
Inherited from |
Names
All names of this identified object.
URI |
|
|---|---|
Cardinality |
0..* |
Type |
|
Inherited from |
PropertiesCIMDataObject
The single CIM data object in the appropriate dataset context.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
|
Inherited from |
SynchronousMachineDynamics
Synchronous machine model with which this turbine-governor model is associated. TurbineGovernorDynamics shall have either an association to SynchronousMachineDynamics or to AsynchronousMachineDynamics.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
|
Inherited from |
ta
Controller time constant (Ta) (>= 0). Typical value = 0.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
TargetingCIMDataObject
Data objects registered.
URI |
|
|---|---|
Cardinality |
0..* |
Type |
|
Inherited from |
treg
Speed detector time constant (Treg) (>= 0). Typical value = 0.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
TurbineLoadControllerDynamics
Turbine load controller providing input to this turbine-governor.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
|
Inherited from |
tw
Water inertia time constant (Tw) (>= 0). Typical value = 0.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |
velmax
Maximum gate opening velocity (Velmax) (< GovHydroPID2.velmin). Unit = PU / s. Typical value = 0.
URI |
|
|---|---|
Cardinality |
0..1 |
Type |