PssPTIST3

ExcitationSystemDynamics

1

ExcitationSystemDynamics

Excitation system model with which this power system stabilizer model is associated.

InstanceSet

1

InstanceSet

Dataset containing the data objects.

a0

0..1

PU

Filter coefficient (A0).

a1

0..1

PU

Limiter (Al).

a2

0..1

PU

Filter coefficient (A2).

a3

0..1

PU

Filter coefficient (A3).

a4

0..1

PU

Filter coefficient (A4).

a5

0..1

PU

Filter coefficient (A5).

al

0..1

PU

Limiter (Al).

athres

0..1

PU

Threshold value above which output averaging will be bypassed (Athres). Typical value = 0,005.

b0

0..1

PU

Filter coefficient (B0).

b1

0..1

PU

Filter coefficient (B1).

b2

0..1

PU

Filter coefficient (B2).

b3

0..1

PU

Filter coefficient (B3).

b4

0..1

PU

Filter coefficient (B4).

b5

0..1

PU

Filter coefficient (B5).

dl

0..1

PU

Limiter (Dl).

dtc

0..1

Seconds

Time step related to activation of controls (deltatc) (>= 0). Typical value = 0,025 (0,03 for 50 Hz).

dtf

0..1

Seconds

Time step frequency calculation (deltatf) (>= 0). Typical value = 0,025 (0,03 for 50 Hz).

dtp

0..1

Seconds

Time step active power calculation (deltatp) (>= 0). Typical value = 0,0125 (0,015 for 50 Hz).

isw

0..1

boolean

Digital/analogue output switch (Isw). true = produce analogue output false = convert to digital output, using tap selection table.

k

0..1

PU

Gain (K). Typical value = 9.

lthres

0..1

PU

Threshold value (Lthres).

m

0..1

PU

(M). M = 2 x H. Typical value = 5.

nav

0..1

float

Number of control outputs to average (NAV) (1 <= NAV <= 16). Typical value = 4.

ncl

0..1

float

Number of counts at limit to active limit function (NCL) (> 0).

ncr

0..1

float

Number of counts until reset after limit function is triggered (NCR).

pmin

0..1

PU

(Pmin).

t1

0..1

Seconds

Time constant (T1) (>= 0). Typical value = 0,3.

t2

0..1

Seconds

Time constant (T2) (>= 0). Typical value = 1.

t3

0..1

Seconds

Time constant (T3) (>= 0). Typical value = 0,2.

t4

0..1

Seconds

Time constant (T4) (>= 0). Typical value = 0,05.

t5

0..1

Seconds

Time constant (T5) (>= 0).

t6

0..1

Seconds

Time constant (T6) (>= 0).

tf

0..1

Seconds

Time constant (Tf) (>= 0). Typical value = 0,2.

tp

0..1

Seconds

Time constant (Tp) (>= 0). Typical value = 0,2.

PropertiesCIMDataObject

0..1

ChangeSetMember

The single CIM data object in the appropriate dataset context.

aliasName

0..1

string

The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy. The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.

description

0..1

string

The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.

enabled

0..1

boolean

Function block used indicator. true = use of function block is enabled false = use of function block is disabled.

mRID

0..1

string

Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.

name

0..1

string

The name is any free human readable and possibly non unique text naming the object.

DiagramObjects

0..*

DiagramObject

The diagram objects that are associated with the domain object.

Names

0..*

Name

All names of this identified object.

RemoteInputSignal

0..*

RemoteInputSignal

Remote input signal used by this power system stabilizer model.

TargetingCIMDataObject

0..*

ChangeSetMember

Data objects registered.