NonConformLoad

Additional equipment container beyond the primary equipment container. The equipment is contained in another equipment container, but also grouped with this equipment container.

The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine. The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.

The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy. The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.

Datasheet information for this power system resource.

All assets represented by this power system resource. For example, multiple conductor assets are electrically modelled as a single AC line segment.

Base voltage of this conducting equipment. Use only when there is no voltage level container used and only one base voltage applies. For example, not used for transformers.

All clearances applicable to this power system resource.

All configuration events created for this Power System resource.

The contingency equipments in which this equipment participates.

The controller outputs used to actually govern a regulating device, e.g. the magnetization of a synchronous machine or capacitor bank breaker actuator.

Number of individual customers represented by this demand.

The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.

The diagram objects that are associated with the domain object.

The energy consumer action that is performed on the energy consumer

The individual phase models for this energy consumer.

Equipment limit series calculation component to which this equipment contributes.

Container of this equipment.

All faults on this equipment.

The generic action that is performed on the power system resource

Used for Yn and Zn connections. True if the neutral is solidly grounded.

Action involving grounding operation on this conducting equipment.

Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.

Dataset containing the data objects.

Jumper action involving jumping operation on this conducting equipment.

Limit dependencymodels organized under this equipment as a means for organizing the model in a tree view.

Load dynamics model used to describe dynamic behaviour of this energy consumer.

Group of this ConformLoad.

The load response characteristic of this load. If missing, this load is assumed to be constant power.

Location of this power system resource.

The measurements associated with this power system resource.

Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.

The name is any free human readable and possibly non unique text naming the object.

All names of this identified object.

The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.

Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.

The operating shares of this power system resource.

The operational limit sets associated with this equipment.

All operational restrictions for this equipment.

All operational tags placed on this power system resource.

The outage that is isolated by the outage isolation equipment.

All outages in which this equipment is involved.

Active power of the load. Load sign convention is used, i.e. positive sign means flow out from a node. For voltage dependent loads the value is at rated voltage. Starting value for a steady state solution.

Active power of the load that is a fixed quantity and does not vary as load group value varies. Load sign convention is used, i.e. positive sign means flow out from a node.

Fixed active power as a percentage of load group fixed active power. Used to represent the time-varying components. Load sign convention is used, i.e. positive sign means flow out from a node.

The type of phase connection, such as wye or delta.

The energy consumer is assigned to this power cut zone.

The single CIM data object in the appropriate dataset context.

Protection equipment used to protect specific conducting equipment.

The operating condition to the Conducting Equipment is changed when protective action adjustment is activated. For ShuntCompensator or other conducting equipment that operates on discrete values (integer), the values given in float will be rounded.

Protective action is controlling equipment. This can be direct signals from the control center, or emulation of action done by protection equipment.

All events associated with this power system resource.

Custom classification for this power system resource.

Reactive power of the load. Load sign convention is used, i.e. positive sign means flow out from a node. For voltage dependent loads the value is at rated voltage. Starting value for a steady state solution.

Reactive power of the load that is a fixed quantity and does not vary as load group value varies. Load sign convention is used, i.e. positive sign means flow out from a node.

Fixed reactive power as a percentage of load group fixed reactive power. Used to represent the time-varying components. Load sign convention is used, i.e. positive sign means flow out from a node.

Reporting groups to which this power system resource belongs.

The status state variable associated with this conducting equipment.

Data objects registered.

Conducting equipment have terminals that may be connected to other conducting equipment terminals via connectivity nodes or topological nodes.

All usage points connected to the electrical grid through this equipment.

The verification action that is performed on the power system resource