ProtectedSwitch

Additional equipment container beyond the primary equipment container. The equipment is contained in another equipment container, but also grouped with this equipment container.

The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to “true” the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine. The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection.

The aliasName is free text human readable name of the object alternative to IdentifiedObject.name. It may be non unique and may not correlate to a naming hierarchy. The attribute aliasName is retained because of backwards compatibility between CIM relases. It is however recommended to replace aliasName with the Name class as aliasName is planned for retirement at a future time.

Datasheet information for this power system resource.

All assets represented by this power system resource. For example, multiple conductor assets are electrically modelled as a single AC line segment.

Base voltage of this conducting equipment. Use only when there is no voltage level container used and only one base voltage applies. For example, not used for transformers.

The maximum fault current a breaking device can break safely under prescribed conditions of use.

All clearances applicable to this power system resource.

Composite switch to which this Switch belongs.

All configuration events created for this Power System resource.

The contingency equipments in which this equipment participates.

The controller outputs used to actually govern a regulating device, e.g. the magnetization of a synchronous machine or capacitor bank breaker actuator.

The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy.

The diagram objects that are associated with the domain object.

Equipment limit series calculation component to which this equipment contributes.

Container of this equipment.

All faults on this equipment.

The generic action that is performed on the power system resource

Action involving grounding operation on this conducting equipment.

Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.

Dataset containing the data objects.

Jumper action involving jumping operation on this conducting equipment.

Limit dependencymodels organized under this equipment as a means for organizing the model in a tree view.

Location of this power system resource.

If true, the switch is locked. The resulting switch state is a combination of locked and Switch.open attributes as follows:

• locked=true and Switch.open=true. The resulting state is open and locked;
• locked=false and Switch.open=true. The resulting state is open;
• locked=false and Switch.open=false. The resulting state is closed.

The measurements associated with this power system resource.

Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.

The name is any free human readable and possibly non unique text naming the object.

All names of this identified object.

The equipment is enabled to participate in network analysis. If unspecified, the value is assumed to be true.

Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model.

The attribute is used in cases when no Measurement for the status value is present. If the Switch has a status measurement the Discrete.normalValue is expected to match with the Switch.normalOpen.

The attribute tells if the switch is considered open when used as input to topology processing.

Protection equipments that operate this ProtectedSwitch.

The operating shares of this power system resource.

The operational limit sets associated with this equipment.

All operational restrictions for this equipment.

All operational tags placed on this power system resource.

The outage that is isolated by the outage isolation equipment.

All outages in which this equipment is involved.

The single CIM data object in the appropriate dataset context.

Protection equipment used to protect specific conducting equipment.

The operating condition to the Conducting Equipment is changed when protective action adjustment is activated. For ShuntCompensator or other conducting equipment that operates on discrete values (integer), the values given in float will be rounded.

Protective action is controlling equipment. This can be direct signals from the control center, or emulation of action done by protection equipment.

All events associated with this power system resource.

Custom classification for this power system resource.

The maximum continuous current carrying capacity in amps governed by the device material and construction. The attribute shall be a positive value.

A breaker may have zero or more automatic reclosures after a trip occurs.

Reporting groups to which this power system resource belongs.

Branch is retained in the topological solution. The flow through retained switches will normally be calculated in power flow.

The status state variable associated with this conducting equipment.

The switch state associated with the switch.

Action changing status of this switch.

The switch on count since the switch was last reset or initialized.

The date and time when the switch was last switched on.

The individual switch phases for the switch.

A Switch can be associated with SwitchSchedules.

Data objects registered.

Conducting equipment have terminals that may be connected to other conducting equipment terminals via connectivity nodes or topological nodes.

All usage points connected to the electrical grid through this equipment.

The verification action that is performed on the power system resource